FSO equipment ARTOLINK models

All model FSO equipment ARTOLINK have in its composition :

• double channel technology
• active link loss forwarding (ALLF) system
• built-in service channel
• systems of targeting and aiming
• power supply unit (AC 220V, DC 48V)
• cables 50m
• and other key features

General models parameters :

	Model	Speed of information transmission, protocol	Recommend distance, m	Features
	M1 FE	10/100 Mbit/s IEEE 802.3/ IEEE 802.3u	300-500	Full duplex ALLF double channel technology without SSS and IP-control
	M1 FE-2A	10/100 Mbit/s IEEE 802.3/ IEEE 802.3u	300-3000	Full duplex ALLF spatial stabilization system (autotracking) double channel technology SNMP traps signalling System of remote control through IP-networks .
	M1 FE-2A-R	10/100 Mbit/s IEEE 802.3/ IEEE 802.3u	1500-7000	Calibrated backup channel (5.1-5.86 GHz) spatial stabilization system (autotracking) SNMP traps signalling System of remote control through IP-networks

ARTOLINK FSO equipment model M1 FE
Technical parameters

Transmitter system   Maximal speed of transmission, Mbit/s 100 Wavelength, nm 785 Number of transmitters 3 Maximum average optical power output, Dbm 17 Energetic aperture, mrad 0,55 Receiver system   Type PIN Sensitivity (including losses in optical system), Dbm -31 Number of receiving apertures 2 Total square of receiving aperture, sm 2 72,5 Communication line   Line budget at a distance 1 km , Dbm 35 Dynamic range of optical channel, Dbm 63     Operating temperature range, o C - transmit-receive module (TRM) -40 +50 - external interface device (EID) +1 +40 Outdoor unit environment protection class IP65     Power consumption, W, not more than 20 Dimensions, mm - TRM 555x475x225 - EID 230x120x55 Weight, kg - TRM <14 - EID <2

Delivery set

Set of delivery includes all necessities for organization of telecommunication channel point to point.

• transmit - receive module (TRM) – 2 items;
• external interface device (EID) – 2 items
• internal interface cable (IIC) between TRM and EID 50m long – 2 items
• computer control cable between TRM and computer RS232 port (CCC) – 2 items
• signal cable, 50m – 2 items
• remote control software
• magnetic key – 2 items
• user guide (on CD)
• packing (3 pasteboard boxes)

Additional parts

	Item
	Internal Interface Cable, 100m
	Signal Cable, 100m
	RF backup channel, pre Wi-Max, 5.1-5.8 GHz
	Ethernet links tester ETest
	Universal Mounting Set (UMS)

Order

---

ARTOLINK FSO equipment model M1 FE-2A
Technical parameters

Transmitter system   Maximal speed of transmission, Mbit/s 100 Wavelength, nm 785 Number of transmitters 3 Maximum average optical power output, Dbm 17 Energetic aperture, mrad 0,55 Receiver system   Type PIN Sensitivity (including losses in optical system), Dbm -31 Number of receiving apertures 2 Total square of receiving aperture, sm 2 72,5 Autotracking   Wavelength of pointing laser 785 Angle sensitivity of axes deviation sensor, mrad 0,0075 Angle field of vision of axes deviation sensor, mrad 5 Accuracy of supporting of communication line direction, mrad 0,08 Speed of autotracking adjusting, mrad/s 8 Dynamic range of angle deviation processing, mrad 50 Communication line   Line budget at a distance 1 km , Dbm 35 Dynamic range of optical channel, Dbm 63     Operating temperature range, o C - transmit-receive module (TRM) -40 +50 - external interface device (EID) +1 +40 Outdoor unit environment protection class IP65     Power consumption, W, not more than 20 Dimensions, mm - TRM 555x475x225 - EID 230x120x55 Weight, kg - TRM <14 - EID <2

Delivery set

Set of delivery includes all necessities for organization of telecommunication channel point to point.

• transmit - receive module (TRM) – 2 items;
• external interface device (EID) – 2 items
• internal interface cable (IIC) between TRM and EID 50m long – 2 items
• computer control cable between TRM and computer RS232 port (CCC) – 2 items
• signal cable, 50m – 2 items
• remote control software
• magnetic key – 2 items
• user guide (on CD)
• packing (3 pasteboard boxes)

Additional parts

	Item
	Internal Interface Cable, 100m
	Signal Cable, 100m
	RF backup channel, pre Wi-Max, 5.1-5.8 GHz
	Ethernet links tester ETest
	Universal Mounting Set (UMS)

Order

---

ARTOLINK FSO equipment model M1 FE-2A-R
Technical parameters

Transmitter system
Maximal speed of transmission, Mbit/s	100
Wavelength, nm	785
Number of transmitters	3
Maximum average optical power output, Dbm	17
Energetic aperture, mrad	0,55
Receiver system
Type	PIN
Sensitivity (including losses in optical system), Dbm	-31
Number of receiving apertures	2
Total square of receiving aperture, sm 2	72,5
Autotracking
Wavelength of pointing laser	785
Angle sensitivity of axes deviation sensor, mrad	0,0075
Angle field of vision of axes deviation sensor, mrad	5
Accuracy of supporting of communication line direction, mrad	0,08
Speed of autotracking adjusting, mrad/s	8
Dynamic range of angle deviation processing, mrad	50
Communication line
Line budget at a distance 1 km , Dbm	35
Dynamic range of optical channel, Dbm	63
Operating temperature range, o C
- transmit-receive module (TRM)	-40 +50
- external interface device (EID)	+1 +40
Outdoor unit environment protection class	IP65
Power consumption, W, not more than	20
Dimensions, mm
- TRM	555x475x225
- EID	230x120x55
Weight, kg
- TRM	<14
- EID	<2

Delivery set

Set of delivery includes all necessities for organization of telecommunication channel point to point.

• transmit - receive module (TRM) – 2 items
• external interface device (EID) – 2 items
• integral design RF blocks with connection cables and mounting kit– 2 items
• internal interface cable (IIC) between TRM and EID 50m long – 2 items
• computer control cable between TRM and computer RS232 port (CCC) – 2 items
• signal cable, 50m – 2 items
• remote control software
• magnetic key – 2 items
• user guide (on CD)
• packing (5 pasteboard boxes)

Additional parts

	Item
	Internal Interface Cable, 100m
	Signal Cable, 100m
	Universal Mounting Set (UMS)

Order

---